HARDFACE TIC-O/G
EN 14700 T Fe8
• Tubular hardsurfacing wire for open arc welding
• High Chromium cast iron for hardfacing components subject to severe abrasion and heavy impact
• The weld deposit contains finely dispersed Titanium Carbide particles in a high chromium martensitic matrix
Hardface TiC-O is designed for excellent resistance to heavy impact , gouging and grinding abrasion. Some relief checking is normal but can be minimised by use of suitable preheat.
Examples
Augers, Scraper blades, mixer tyres, brick dies, earthmoving and crushing equipment.
| TYPICAL ALL-WELD METAL ANALYSIS |
|---|
| C | Mn | Si | Cr | Mo | Ti |
|---|
| 1.80 | 1.20 | 0.70 | 6.50 | 0.80 | 5.00 |
| TYPICAL ALL-WELD METAL MECHANICAL PROPERTIES |
|---|
| Hardness – 3-layer deposit on mild steel: 57 HRc | |
|---|
| |
|---|
| Current type | Shielding gas |
|---|
| DC (+) | Self shielded | |
| Diameter | Amperage [A] | Voltage [V] | Stick-out [mm] |
|---|
| [mm] | Range | Optimum | Range | Optimum | Range | Optimum |
|---|
| 1.2 | 140 - 230 | 200 | 23 - 32 | 28 | 25 - 50 | 30 |
| 1.6 | 180 - 300 | 250 | 23 - 32 | 28 | 25 - 50 | 30 |
| 2.0 | 200 - 400 | 300 | 26 - 32 | 28 | 25 - 50 | 35 |
| 2.4 | 250 - 450 | 350 | 26 - 32 | 28 | 25 - 50 | 40 |
| 2.8 | 250 - 450 | 400 | 28 - 32 | 30
| 25 - 50 | 40 |
Recovery: 90 %
Flat, half up, half down
1.2, 1.6, 2.0, 2.4, 2.8
Other diameters: please consult us
| Diameter | ≤ 2.4 mm | ≥ 2.4 mm |
|---|
| Standard packaging [EN ISO 544] | Spool : BS 300 | Coil : B 450 | Drum |
| Weight | 15 kg | 25 kg | Up to 330 kg |
Other packaging: please consult us
