HARDFACE R46-G
EN 14700 T Fe3
• Tubular wire for gas shielded arc hardfacing
• Tough and hard martensitic deposit
Tough deposits with increasing hardness for touching up and repair of hot and cold working tooling Can be heat treated by oil quenching and tempering.
Examples
Plastic injection screws and moulds for polymers
| TYPICAL ALL-WELD METAL ANALYSIS |
|---|
| C | Mn | Si | Cr | Mo | Ti | Fe |
|---|
| 0.22 | 1.00 | 0.50 | 5.00 | 3.80 | 0.25 | Rest |
Structure: martensite
| TYPICAL ALL-WELD METAL MECHANICAL PROPERTIES |
|---|
Hardness – 3-Layer deposit : As welded 44-48 HRc
| |
|---|
| Current type | Shielding gas |
|---|
| DC (+) | EN ISO 14175 | M12 / M13 / M20 / M21 |
Diameter
[mm] | Amperage [A] | Voltage [V] | Stick-out [mm] | Gas flow [l/min] |
|---|
| 1.2 | 100 - 300 | 24 - 32 | 12 - 25 | 10 - 20 |
| 1.6 | 150 - 300 | 24 - 32 | 12 - 25 | 10 - 20 |
| 2.0 | 200 - 400 | 24 - 32 | 12 - 30 | 10 - 20 |
| 2.4 | 250 - 450 | 24 - 32 | 12 - 30 | 10 - 20 |
Recovery: > 95 %
Hardface R46-G, up to Ø 1.6 mm, is suitable for downhand as well as for positional welding by adapting transfer mode and welding parameters as for solid
1.2, 1.6, 2.0, 2.4
Other diameters: please consult us
| Diameter | ≤ 2.4 mm | ≥ 2.4 mm |
|---|
| Standard packaging [EN ISO 544] | Spool : BS 300 | Coil : B 450 | Drum |
| Weight | 15 kg | 25 kg | Up to 330 kg |
Other packaging: please consult us
