| ASME IIC SFA 5.22 / AWS A 5.22: | (EC308Mo)* |
| EN ISO 17633-A: | T 20 10 3 M M 1 |
| EN ISO 17633-B : | TS308Mo-MG0* |
| *Mo may exceed 3.0 % and Cr may exceed 21.0 % |
| ASME IX Qualification | QW432 F-N° 6 QW442 A-N° 8 |
• Metal cored stainless steel wire for gas shielded arc welding
• 20% chromium - 9% nickel - 3% molybdenum deposit
• Enhanced productivity, improved weldability, better wetting properties compared to solid wires
• Excellent weld metal quality and X-ray soundness
• Welding stainless steels of similar composition or ferritic stainless steels
• Joining stainless steels to mild and low-alloyed steels
• Buffer layers before hardsurfacing
• Maintenance on « hard-to-weld steels »
• Welding high carbon hardenable steels, of known or unknown composition and generally most of steels subject to cracking such as tool steels, manganese steels, spring steels and high speed steels
| TYPICAL ALL-WELD METAL ANALYSIS |
|---|
| C | Mn | Si | Cr | Ni | Mo | S | P |
|---|
| 0.05 | 1.50 | 0.80 | 20.5 | 9.70 | 3.2 | 0.008 | 0.020 |
Typical ferrite level: 20 %
| MINIMUM ALL-WELD METAL MECHANICAL PROPERTIES |
|---|
| Rm [MPa] | Rp0.2% [MPa] | A5 [%] | KV [J] |
|---|
| 620 | 400 | 30 | +20°C : 32 |
| TYPICAL ALL-WELD METAL MECHANICAL PROPERTIES |
|---|
| Rm [MPa] | Rp0.2%[MPa] | A5 [%] | KV [J] |
|---|
| 780 | 600 | 35 | +20°C : 60 |
| EN ISO 14175 : | M12 | M12 Ar + 0.5 % < CO2 ≤ 2.5 with or without Helium |
|---|
| Z | Ar + CO2 ≤ 0.5 % or O2 ≤ 0.5 % with or without Helium |
| M20 | Ar + 5 % < CO2 ≤ 15 |
| I1 | Ar |
| M13 | Ar + 0.5 % < O2 ≤ 3.0 with or without Helium |
| Current type | Gas flow rate | Stick out | Recovery |
|---|
| DC (+)/pulsed | 10 - 20 l/min. | 12 - 25 mm | 98 % |
| EN ISO 6947: | PA, PB. |
|---|
| ASME IX: | 1F, 1G, 2F. |
Tube S 20 9 3-G is primarily used in the flat and horizontal-vertical positions. However, welds in other positions are also possible using the short-circuiting or pulsed arc modes of transfer.
| Diameter | 1.2 mm | 1.6 mm |
|---|
| EN ISO 544 – ASME II C SFA-5.2 M |
| Spool type | S200 | BS300 | BS300 |
| Weight | 5 kg | 15 kg | 15 kg |
Other packaging: please consult us
