Portable MultiSurfacer^TM - Boiler Panel Cladder

	SPECIFICATIONS: TRAVEL Motorised Y-Axis - 4000mm (can be longer) Motorised X-Axis - 4000mm (can be longer) Motorised Z-Axis - 250mm Profile ocsillator asjustable 0.1 to 180.0 degrees WIREFEED SPEEDS  0.2 - 5m/min, 0.5 -10m/min,1.0 - 20m/min   WIRE SIZES Ø  1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 2.8 mm, 3.2 mm, 4.0 mm, 5.0 mm   WELDING PROCESS Open Arc (Standard), Gas Shielded   CONTROL SYSTEM - D2 PENDANT Wirefeed, X-Axis, Y-Axis, Profile Oscillation and Master Module functions combined into a handheld pendant for use on site.

WATER COOLING FOR THE WELDING GUN to provide longer tip life.

DESCRIPTION:

The automatic machine is a portable unit designed to resurface the outer surface of the boiler tube and webbing between the tubes. This is a twin torch system ensuring maximum production rates. The oscillation is specifically designed to follow the profile of the boiler tubes and the oscillation widths can be adjusted. The system has guide wheel to follow the contours of the boiler panel. There are manual motorised stick out adjuster with automated mechanical adjustment system. To move between the different tubes it has a stop welding, retract, step over and return to the correct welding position facility to enable automatic step over function.

BENEFITS:

Lightweight, portable, ease of use, welding repeatability, low-cost automation, use in limited space environment.

INDUSTRIES:

Heat exchanger for the energy generation.