R 12000 Roll Surfacer
R 12000 Roll Surfacer
 
« back

Stationary MultiSurfacerTM - R 12000 Roll Surfacer

SPECIFICATION:

Single RollTwin Roll

image of R 12000 roll surfacer machine used for cladding large rolls in the steel mill		Max. component weight

(supported between
headstock and tailstock)

12000Kg

12000Kg
Max. component length3000mm6000mm (total length of
2 rolls)

Component diameter

1000mm1000mm 


TRAVEL
Motorised X1-Axis - welding head positioning along machine length    

Motorised X2-Axis - welding head oscillation - max. 150mm
Motorised Y-Axis - max. 500mm

Motorised component rotation - 0.03 - 2rpm 

Manual Z-Axis - max. 200mm
 
WIREFEED SPEEDS 
0.2 - 5m/min, 0.5 -10m/min, 1.0 - 20m/min
 
WIRE SIZES Ø 
1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm,
2.8 mm, 3.2 mm, 4.0 mm, 5.0 mm
 
WELDING PROCESS
Open Arc (Standard), Gas Shielded, Submerged Arc 
 
CONTROL SYSTEM - D2 or D3
Wirefeed, X1-Axis,X2-Axis Oscillation, Y-Axis, Rotation and Master Module.

ADDITIONAL OPTIONS:

POWER SOURCES 
WAP 1000-10-CC/CV1000 Amps, 44 Volts DC100% Duty Cycle

100 - 1250 Amps in CC mode

10 - 60 Volts in CV mode

WAP 650-10-CC/CV650 Amps, 44 Volts DC 100% Duty Cycle50 - 815 Amps in CC mode
10 - 65 Volts in CV mode
WAP 650-10-CV650 Amps, 44 Volts DC100% Duty Cycle10 - 44 Volts DC
WAP 450-10 450 Amps, 38 Volts DC100% Duty Cycle 10 - 38 Volts DC
WAP 450-10-Pulsed450 Amps, 38 Volts DC100% Duty Cycle 10 - 38 Volts DC
TWIN WIREfor incresed deposition rate
ADDITIONAL WELDING HEADSfor higher productivity
FUME EXTRACTION SYSTEMSfor environmental protection
FLUX RECOVERY SYSTEMfor submerged arc welding
AUTOMATIC STICK-OUT ADJUSTERfor use on irregular component geometries
PROGRAMMER/SEQUENCERfor greater automation and repeat work
DATA LOGGERfor monitoring QA records
WATER COOLING FOR THE WELDING GUN 
to provide longer tip life

 

DESCRIPTION:

Automatic machine with rotation for one or two components. Headstock and tailstock mounted on heavy-duty ball rails allowing rapid repositioning to accomodate varying component lengths and secured in place with quick locking system. Thermal expansion device fitted to the tailstock. Manual positioning of the welding gun in the angular and Z-Axis directions.

BENEFITS:

Welding repeatability, automation, ease of use.  The R12000 is specifically designed and built with the mechanical design and electronic controls integrated for the cladding of rotary components.

INDUSTRIES:

Steel.

 
My Industry
 
Product support
Get a quote/more information
Our Locations
Promotional Material
Promotional Videos