Welding Alloys - RY 500 Rotating Yoke Surfacer

Stationary MultiSurfacer^TM - RY 500 Rotating Yoke Surfacer

SPECIFICATION:
	Single Roll	Twin Roll
Max. component weight	500Kg	500Kg
Max. component length	1000mm	1000mm each roll
Max. component diameter	1100mm	1100mm
TRAVEL Motorised X¹-Axis - welding head positioning along machine length - max. 1200mm Motorised X²-Axis - welding head oscillation - max 150mm Motorised Y-Axis - max. 1000mm Motorised component rotation - 0.2 - 2rpm Manual Z-Axis - max.200mm Motorised Tiling Yoke - rotation ±120° WIREFEED SPEEDS 0.2 - 5m/min, 0.5 -10m/min,1.0 - 20m/min WIRE SIZES Ø 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 2.8 mm, 3.2 mm, 4.0 mm, 5.0 mm WELDING PROCESS Open Arc (Standard), Gas Shielded, Submerged Arc CONTROL SYSTEM - D2 or D3 Wirefeed, X¹-Axis, X²-Axis Oscillation, Y-Axis, Rotation, Tilt and Master Module.

ADDITIONAL OPTIONS:
POWER SOURCES
WAP 1000-10-CC/CV	1000 Amps, 44 Volts DC	100% Duty Cycle	100 - 1250 Amps in CC mode 10 - 65 Volts in CV mode
WAP 650-10-CC/CV	650 Amps, 44 Volts DC	100% Duty Cycle	50 - 815 Amps in CC mode 10 - 65 Volts in CV mode
WAP 650-10-CV	650 Amps, 44 Volts DC	100% Duty Cycle	10 - 44 Volts DC
WAP 450-10	450 Amps, 38 Volts DC	100% Duty Cycle	10 - 38 Volts DC
WAP 450-10-Pulsed	450 Amps, 38 Volts DC	100% Duty Cycle	10 - 38 Volts DC

TWIN WIRE	for incresed deposition rate
ADDITIONAL WELDING HEADS	for higher productivity
FUME EXTRACTION SYSTEMS	for environmental protection
AUTOMATIC STICK-OUT ADJUSTER	for use on irregular component geometries
PROGRAMMER/SEQUENCER	for greater automation and repeat work
DATA LOGGER	for monitoring QA records
WATER COOLER FOR THE WELDING GUN	to provide longer tip life