MultiJoiner 20 PJ - Pipe Joiner
MultiJoiner 20 PJ - Pipe Joiner
 
« back

Stationary MultiJoinerTM - 20 PJ Pipe Joiner

SPECIFICATION:


Max. component weight

(supported between
headstock and tailstock)

20000Kg

Max. component length20000mm

Component diameter

1200mm


TRAVEL
Motorised X1-Axis - welding head positioning along machine length 

Motorised X2-Axis welding head oscillation - max. 150mm

Motorised Y-Axis - max. 1500mm

Motorised component rotation - 0.03 - 2rpm

Manual Z-Axis - max. 200mm
 
WIREFEED SPEEDS 
0.2 - 5m/min, 0.5 -10m/min, 1.0 - 20m/min
 
WIRE SIZES Ø 
1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm,
2.8 mm, 3.2 mm, 4.0 mm, 5.0 mm
 
WELDING PROCESS
Open Arc (Standard), Gas Shielded, Submerged Arc
 
CONTROL SYSTEM - D2 or D3
Wirefeed, X1-Axis, X2 -Axis Oscillation, Y-Axis, Rotation and Master Module.

ADDITIONAL OPTIONS:

POWER SOURCES 
WAP 1000-10-CC/CV1000 Amps, 44 Volts DC100% Duty Cycle

100 - 1250 Amps in CC mode

10 - 60 Volts in CV mode

WAP 650-10-CC/CV650 Amps, 44 Volts DC 100% Duty Cycle50 - 815 Amps in CC mode
10 - 65 Volts in CV mode
WAP 650-10-CV650 Amps, 44 Volts DC100% Duty Cycle10 - 44 Volts DC
WAP 450-10 450 Amps, 38 Volts DC100% Duty Cycle 10 - 38 Volts DC
WAP 450-10-Pulsed450 Amps, 38 Volts DC100% Duty Cycle 10 - 38 Volts DC
TWIN WIREfor increased deposition rate
ADDITIONAL WELDING HEADSfor higher productivity
FUME EXTRACTION SYSTEMSfor environmental protection
FLUX RECOVERY SYSTEMSfor submerged arc welding
AUTOMATIC STICK-OUT ADJUSTERfor use on irregular component geometries
PROGRAMMER/SEQUENCERfor greater automation and repeat work
DATA LOGGERfor monitoring QA records
WATER COOLING FOR THE WELDING GUN 
to provide longer tip life 




DESCRIPTION:

Automatic machine with rotation for one or two components.  Headstock and support rolls mounted on heavy-duty ball rails allowing rapid repositioning to accommodate varying component lengths and secured in place with quick locking system.  Thermal expansion device fitted to the support rolls.  Manual positioning of the Welding Gun in the angular and Z-Axis directions.

BENEFITS:

Welding repeatability, automation, ease of use.  The 20PJ is specifically designed and built with integrated electronic controls for the joining of pipe to pipe and pipe to elbow.

INDUSTRIES:

Oil and Gas.

 

 

 
My Industry
 
Product support
Get a quote/more information
Our Locations
Promotional Material
Promotional Videos