Low and Medium Alloy Steels
Our hardfacing wires for low and medium alloy steels provide a combination of strength, toughness and wear resistance. For repair, rebuilding and buffering.
This selection of flux cored wires are suited to welding of parts such as shafts, rollers, wheels, bucket teeth and blades, conveyor screws, roller bearing seats, gear teeth, forging tools, and more.
Typical all-welded metal analysis |
Hardness - 3 layer deposit
|
|||||||||
C | Mn | Si | Cr | Mo | Ni | Fe | W | V | ||
HARDFACE B Product Datasheet |
0.1 | 1.5 | 0.4 | 1 | 260 HB | |||||
HARDFACE T Product Datasheet |
0.15 | 1.5 | 0.8 | 1.5 | - | - | - | 360 HB | ||
HARDFACE TN Product Datasheet |
0.09 | 1.5 | 0.7 | 0.3 | 0.5 | 2.1 | Bal. | 30-35 HRC | ||
HARDFACE TLN Product Datasheet |
0.14 | 1.1 | 0.4 | 1.1 | 0.4 | 2.2 | Bal. | 300-400 HV | ||
HARDFACE P Product Datasheet |
0.2 | 2 | 0.8 | 3 | - | - | - | 400 HB | ||
HARDFACE L Product Datasheet |
0.5 | 1.5 | 2.5 | 8.5 | - | - | Rest | 56-59 HRC | ||
HARDFACE LP-G Product Datasheet |
0.5 | 1.8 | 1.3 | 7.5 | Bal. | 55-60 HRC | ||||
ROBODUR K 250-G* Product Datasheet |
0.07 | 1.3 | 0.5 | 1.6 | 0.2 | - | - | 250 HB | ||
ROBODUR K 450-G* Product Datasheet |
0.4 | 1.5 | 0.7 | 2.5 | 0.5 | - | - | 450 HB | ||
ROBODUR K 600-G* Product Datasheet |
0.5 | 1.2 | 0.7 | 6 | 0.7 | - | - | 50-62 HRC | ||
ROBODUR K 650-G* Product Datasheet |
0.5 | 1.3 | 1.3 | 5.6 | 1.3 | - | - | 1.3 | 0.3 | 57-62 HRC |
ROBODUR K CERAMIC-G* Product Datasheet |
0.35 | 0.7 | 2.5 | 9.5 | - | - | - | - | - | 55-62 HRC |
-G : gas shielded
*Perfectly suited for robotic applications - excellent current transfer and constant wire feeding properties.