Work Hardening Manganese Alloys
Our range of work hardening manganese alloy welding wires are highly resistant to impact, cracking and high pressure. These flux cored wires are suited for rebuilding, buffer layers and assembly of manganese steels. Applications include repair work on railway frogs and crossings, hammers, bars, cones and jaws for crushers, assembly of wear plates and retouching of casting imperfections.
Typical all-welded metal analysis | Hardness - 3 layer deposit | ||||||||||||
C | Mn | Si | Cr | Ni | Co | Mo | N | S | P | Fe | As welded | Work Hardened | |
HARDFACE 19 9 6 Product Datasheet |
0.1 | 6 | 0.5 | 19 | 9 | 180 HB | 47 HRC | ||||||
HARDFACE AP Product Datasheet |
0.35 | 14 | 0.7 | 15 | 1.4 | 200-240 HB | 45-55 HRC | ||||||
HARDFACE NM14 Product Datasheet |
1 | 14 | 0.5 | ||||||||||
CAVITALLOY Product Datasheet |
0.2 | 9.5 | 1.3 | 19 | - | 10.5 | 0.25 | 0.3 | 0.01 | 0.02 | Bal. | 240 HB | 50 HRC |