
CHROMECORE M 13 4-G
Metal cored gas shielded wire for joining, rebuilding and cladding stainless martensitic and martensitic-ferritic rolled, forged and cast steels
Diameter
1.2mm (0.045"), 1.6mm (1/16")Request a quote
Technical information
Product Details
- Alloy Type: Ferritic and Martensitic Stainless Steels
- Cracks: No
- Machinable: Yes
- Multi-layer: Yes
- AWS Classification(s): ASME IIC SFA 5.22 / AWS A 5.22: EC410NiMo (nearest), ASME IIC SFA-5.9 / AWS A 5.9: EC410NiMo (nearest)
- EN ISO Classification(s): EN 14700: T Fe7, EN ISO 17633-A: T 13 4 M M12 1
- Base Metal(s) to Weld: UNS S42900, AISI CA6NM, 1.4313, UNS S41500, 1.4407, UNS J91540, 1.4414, UNS J91550, 1.4317, 1.4001, AISI 429
- Welding Process(es): GMAW
Features:- 13% Cr, 4% Ni soft martensitic, slag free deposit
- Very good impact toughness characteristics in its category
- HDM guaranteed ≤ 4 ml/ 100g deposited metal over the whole parameter range, typical values ~1ml/100g
Wear type suitability:
Welding Positions:
Welding products and techniques evolve constantly. All descriptions, illustrations and properties given on this site are subject to change without notice and can only be considered as suitable for general guidance. This information is intended to help the user make the correct choice of product but it is the responsibility of the user to assess the suitability for their intended application. Information may vary by region, please consult your local subsidiary.